This machine is used to carry Koop stones or cut stone. The final dimensions of this device are 2230 × 3170 mm. The structure of this machine is designed to carry up to 30 tons of cab and has the least deformation due to the use of European standard beams. The wagon is powered by the engine (3 hp). Starting and stopping it using the inverter will be slow. In addition, a total of 6 European plates (4 centimeters), along with this wagon, are designed to hold the cut stone the best.
Saw carriage carrier:
This machine is designed to move the saw carriages. The structure of this device is highly robust due to the use of European girder and joints, and its start and stop motion is very smooth and without impact by using an inverter.
The overall dimensions of the device are 31150 * 2990 * mm with a maximum height of 300 mm on the rail.
On this machine, there is the ability to install the saw collector cable. Also, to reduce the cabling and power line, it is possible to use the rail and conductor system (bus bar) to power the engine.
Battalion wagons:
This device is designed for rotating saws in three modes: 0-90-180 degrees. The space occupied by this device is a circle with a diameter of 3720 mm. The structure of this device is highly robust due to the use of European girder and joints, which has the ability to move a wagon with a maximum weight of 40 tons. The starting and stopping of this device at the stations will be very smooth and without impact by using an inverter. One of the specifications of this machine is the use of iron wheels with two hardened rails.
